Summit X450-24X Switch Rear Panel - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

Mini-GBIC ports—20 mini-GBIC ports that deliver high-density fiber connectivity in 1.75-inch (1U)
●
form factor.
Console port—Serial port used to connect a terminal and perform local management.
●

Summit X450-24x Switch Rear Panel

Figure 178 shows the rear panel of the Summit X450-24x switch.
Figure 178: Summit X450-24x switch rear panel
10 Gigabit
uplink option
The rear panel on the Summit X450-24x switch includes:
Slot for the Summit XGM-2xn option card, which allows you to add up to two 10 Gigabit XENPAK
●
modules (
see "Summit XGM-2xn Option Card" on page 295
Management port
●
Used to connect the system into a parallel management network for administration.
■
OR
Used to connect an Ethernet cable directly from your laptop into the management port to view
■
and locally manage the switch configurations.
Two LEDs for the management port, located in the bottom corners of the port.
●
Two high-performance stacking ports
●
Redundant power input connector for an optional, redundant Extreme External Power Supply (see
●
"EPS-160 External Power Module (with EPS-T)" on page 309
redundant power supply cable is shipped with the EPS-160.
AC power socket
●
The switch automatically adjusts to the supply voltage. The power supply operates from 100 VAC to
240 VAC.
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
Management port
10 Gigabit
stacking ports
Summit X450 Series Switches
External power
supply connection
Power socket
for complete details)
for complete details). The connecting
S450_003A
255