Summit X450A-48Tdc Switch - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

Consolidated extremexos
Hide thumbs Also See for BlackDiamond 8800 Series:
Table of Contents

Advertisement

NOTE
For information regarding these compatible Summit option cards, see
page 297
or
"Summit XGM2-2xf Option Card" on page
Management port
Used to connect the system into a parallel management network for administration.
OR
Used to connect an Ethernet cable directly from your laptop into the management port to view
and locally manage the switch configurations.
Two LEDs for the management port, located in the bottom corners of the port.
Two high-performance stacking ports
Redundant power input connector for an optional, redundant Extreme External Power Supply (see
"EPS-500 External Power Supply Unit" on page 317
power supply cable is shipped with the EPS-500 power supply.
AC power socket
The switch automatically adjusts to the supply voltage. The power supply operates from 100 VAC to
240 VAC.

Summit X450a-48tDC Switch

The Summit X450a-48tDC switch includes the following:
44 fixed 10/100/1000 BASE-T ports that deliver high-density copper connectivity for 44 Gbps in
1.75-inch (1U) form factor (ports 1-44)
Four combination ports that provide 10/100/1000 BASE-T or mini-GBIC connectivity for 4 Gbps of
copper or fiber connectivity (ports 45-48)
NOTE
For information about mini-GBICs, see
Two high-performance stacking ports
Optional:
Summit XGM2-2xn option card, which allows you to add up to two 10 Gigabit XENPAK modules
Summit XGM2-2xf option card, which allows you to add up to two 10 Gigabit XFP modules
NOTE
For information regarding these compatible Summit option cards, see
page 297
or
"Summit XGM2-2xf Option Card" on page
Optional: EPS-150DC External Power Module (Model No. 10909), which is the redundant power
supply for use with the Summit X450a-48tDC switch. When this switch is used with the EPS-150DC,
the power supplies (internal and redundant) are fully fault tolerant and load-sharing. If one power
supply fails, the other power supply will provide sufficient power to operate the switch.
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
302.
for complete details). The connecting redundant
"Mini-GBIC Interfaces" on page
302.
Summit X450a Series Switches
"Summit XGM2-2xn Option Card" on
338.
"Summit XGM2-2xn Option Card" on
267

Advertisement

Table of Contents
loading

Table of Contents