Installing a BlackDiamond 10808 Chassis
Mid-Mount Rack Installation
To install the chassis in a mid-mount position, use the optional mid-mount kit.
To mount the chassis into the rack using the mid-mount kit:
1 Locate the helper bracket.
2 Mount the helper bracket in the lowest available position in the rack using four appropriate screws
(not provided), as shown in
Figure 78: Helper bracket for mounting the BlackDiamond 10808 switch
3 Attach a mid-mount flange to each side of the BlackDiamond 10808 chassis using the provided
screws.
Use the appropriate flange for the left and right side, as shown in
132
Figure
78.
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
EX_086A
Figure
79.