Mid-Mounting A Blackdiamond 12802 Chassis - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

Installing the BlackDiamond 12802 Chassis
4 Attach the chassis to the system rack using eight rack system mounting screws (screws not
provided). Refer to
Figure 64: Securing the BlackDiamond 12802 chassis to the rack (front-mount position)

Mid-Mounting a BlackDiamond 12802 Chassis

To mid-mount the BlackDiamond 12802 chassis in a rack:
1 Place each mounting bracket against the switch chassis with the mounting flange at the middle of
the chassis side
Figure 65: Mounting flanges at the middle
2 Insert and tighten the provided flat-head screws to secure the brackets to the chassis.
3 Slide the chassis into the equipment rack.
4 Attach the chassis to the system rack using eight rack system mounting screws (screws not
provided). Refer to
118
Figure 64 for the screw locations.
(Figure 65).
Bracket
Figure 66 for the screw locations.
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
BD_151
Bracket
Screw
BD_143