Summit X450-24X Switch; Summit X450-24X Switch Front Panel - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

Summit Family of Switches

Summit X450-24x Switch

The Summit X450-24x switch includes the following:
20 fixed mini-GBIC ports that deliver high-density fiber connectivity for 20 Gbps in 1.75-inch (1U)
●
form factor (ports 5-24)
NOTE
For information about mini-GBICS, see
Four combination ports that provide 10/100/1000 BASE-T or mini-GBIC connectivity for 4 Gbps of
●
copper or fiber connectivity (ports 1-4)
Two high-performance stacking ports
●
Optional: Summit XGM-2xn option card, which allows you to add up to two 10 Gigabit XENPAK
●
modules
NOTE
For information regarding the Summit XGM-2xn option card, see
Optional: EPS-160 External Power Module (Model No. 10907), which is the compatible redundant
●
power supply available for use with the Summit X450-24x. When this switch is used with the EPS-
160, the power supplies (internal and redundant) are fully fault tolerant and load-sharing. If one
power supply fails, the other power supply will provide sufficient power to operate the switch.

Summit X450-24x Switch Front Panel

Figure 177 shows the front panel of the Summit X450-24x switch.
Figure 177: Summit X450-24x switch front panel
The front panel on the Summit X450-24x consists of:
LEDs—For a description of the LEDs and their behavior, see
●
Switch LEDs" on page
Stack number indicator—Numeric indicator of the position of this switch in a stacked configuration.
●
Combination ports—Four combination ports that provide 10/100/1000 BASE-T or mini-GBIC
●
connectivity for 4 Gbps of fiber or copper connectivity.
254
10/100/1000 Mbps ports
Band On = Link
Blinking = Activity
STACK NO.
Stack number
Shared ports
indicator
276.
"Mini-GBIC Interfaces" on page
"Summit XGM-2xn Option Card" on page
Mini-GBIC ports
Shared Ports
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
338.
Console
port
S450_001C
"Summit X450, X450a, and X450e Series
295.