Summit X450A Series Switches; Summit X450A-24T Switch - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

Summit Family of Switches

Summit X450a Series Switches

The Summit X450a series of switches consists of the following switches:
Summit X450a-24t Switch on page 256
●
Summit X450a-24tDC Switch on page 259
●
Summit X450a-24x Switch on page 261
●
Summit X450a-24xDC Switch on page 263
●
Summit X450a-48t Switch on page 265
●
Summit X450a-48tDC Switch on page 267
●

Summit X450a-24t Switch

The Summit X450a-24t switch includes the following:
20 fixed 10/100/1000 BASE-T ports that deliver high-density copper connectivity for 20 Gbps in
●
1.75-inch (1U) form factor (ports 1-20)
Four combination ports that provide 10/100/1000 BASE-T or mini-GBIC connectivity for 4 Gbps of
●
copper or fiber connectivity (ports 21-24)
NOTE
For information about mini-GBICs, see
Two high-performance stacking ports
●
Optional:
●
Summit XGM2-2xn option card, which allows you to add up to two 10 Gigabit XENPAK modules
■
Summit XGM2-2xf option card, which allows you to add up to two 10 Gigabit XFP modules
■
NOTE
For information regarding these compatible Summit option cards, see
page 297 or
Optional: EPS-LD External Power Supply Unit (Model No. 45019), which is a redundant power
●
supply for use with the Summit X450a-24t switch. When this switch is used with the EPS-LD, the
power supplies (internal and redundant) are fully fault tolerant and load-sharing. If one power
supply fails, the other power supply will provide sufficient power to operate the switch.
256
"Mini-GBIC Interfaces" on page
"Summit XGM2-2xf Option Card" on page
338.
"Summit XGM2-2xn Option Card" on
302.
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide