Summit Family of Switches
The front panel on the Summit X450a-24x switch includes:
LEDs—For a description of the LEDs and their behavior, see
●
Switch LEDs" on page
Stack number indicator—Numeric indicator of the position of this switch in a stacked configuration.
●
Combination ports—Four combination ports that provide 10/100/1000 BASE-T or mini-GBIC
●
connectivity for 4 Gbps of fiber or copper connectivity.
Mini-GBIC ports—20 mini-GBIC ports that deliver high-density fiber connectivity in 1.75-inch (1U)
●
form factor.
Console port—Serial port used to connect a terminal and perform local management.
●
Summit X450a-24x Switch Rear Panel
Figure 184
shows the rear panel of the Summit X450a-24x switch.
Figure 184: Summit X450a-24x switch rear panel
The rear panel on the Summit X450a-24x switch includes:
Slot for a Summit option card
●
Summit XGM2-2xn option card, which allows you to add up to two 10 Gigabit XENPAK modules
■
OR
Summit XGM2-2xf option card, which allows you to add up to two 10 Gigabit XFP modules
■
NOTE
For information regarding these compatible Summit option cards, see
page 297
or
Management port
●
Used to connect the system into a parallel management network for administration.
■
OR
Used to connect an Ethernet cable directly from your laptop into the management port to view
■
and locally manage the switch configurations.
Two LEDs for the management port, located in the bottom corners of the port.
●
Two high-performance stacking ports
●
262
276.
Management port
10 Gigabit
uplink option
"Summit XGM2-2xf Option Card" on page
"Summit X450, X450a, and X450e Series
External power
supply connection
10 Gigabit
Power socket
stacking ports
"Summit XGM2-2xn Option Card" on
302.
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
SH_031