Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual page 232

Repacking a BlackDiamond Chassis
7 Slide the top of the BlackDiamond shipping carton down and over the BlackDiamond 8806/12804
chassis (see
Figure 156: Replacing the carton over the BlackDiamond 8806/12804 chassis
8 Insert the clip locks (see
a Place your thumb and index finger inside the clip lock touching the prongs.
b Squeeze the prongs inward, applying equal pressure on each side.
c Push the prongs inward until the clip lock is secured onto the carton.
Repeat steps 8a through 8c to insert each of the remaining clip locks.
CAUTION
Proper installation of the clip locks is critical for safe shipment of the BlackDiamond 8806/12804 chassis. Make
sure that the clip locks are secure and accurately installed.
Figure 157: Clip locks on the BlackDiamond 8806/12804 chassis shipping carton
232
Figure 156).
Place box
over
chassis
Figure 157).
Squeeze prongs
to unlock
Clip lock
Open
lock
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
Insert & close
4 clip locks
to secure box
ASP016a
EX_121
EX_111A