Pre-Installation Requirements - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

Figure 49: Correct method for lifting the BlackDiamond 8810 chassis
NOTE
Save all packaging, bolts, washers, and clip locks, as well as the box and pallet for future use in the event that the
chassis needs to be moved to another location or returned to Extreme Networks.

Pre-Installation Requirements

The following tools and equipment are required for installing the BlackDiamond 8810 chassis:
ESD-preventive wrist strap (provided)
●
19-inch helper bracket (provided)
●
For installing the chassis in a mid-mount position in the rack:
●
Optional BlackDiamond 8810 mid-mount kit, Model 41141. Order this kit separately from the chassis.
Rack-mount screws appropriate for your organization's rack system, as follows:
●
4 screws to attach the helper bracket to the rack
■
8 screws to secure the BlackDiamond 8810 chassis in the rack
■
The screw size will vary based on your organization's rack system; screws are not provided.
Screwdriver appropriate for the rack-mounting screws you will use
●
The screwdriver size will vary based on the requirements of your organization's rack system.
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide

Pre-Installation Requirements

ASP017A
99