Summit X450A-48Tdc Switch - Extreme Networks Summit X250e-24t Hardware Installation Manual

The rear panel of the Summit X450a-48t switch
Slot for one of the following Summit option cards
●
Summit XGM2-2xn option card, which allows you to add up to two 10-Gigabit XENPAK modules
■
Summit XGM2-2xf option card, which allows you to add up to two 10-Gigabit XFP modules
■
For information about these Summit option cards, see
page 149 or "Summit XGM2-2xf Option Card" on page
Management port with associated LEDs
●
Two high-performance stacking ports with associated LEDs
●
Redundant power input connector for optional connection to the EPS-500 External Power Supply
●
Unit (Model No. 10911). The connecting redundant power supply cable is shipped with the EPS-500
power supply.
See "EPS-500 External Power Supply Unit" on page 68
AC power input socket
●
The power supply operates from 100 VAC to 240 VAC.
Figure 40: Summit X450a-48t Switch Rear Panel
Management port
10 Gigabit
uplink option

Summit X450a-48tDC Switch

The front panel of the Summit X450a-48tDC switch
Forty-four fixed autosensing 10/100/1000 BASE-T ports (ports 1-44) that provide 44 Gbps of
●
high-density copper connectivity
Four combination ports (ports 45-48) using RJ-45 connectors and SFPs
●
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
LEDs to indicate port status and switch operating conditions.
●
For a description of the LEDs and their operation, see
Switch LEDs" on page
Stack number indicator showing the position of this switch in a stacked configuration.
●
Serial console port used to connect a terminal and perform local management.
●
Summit Family Switches Hardware Installation Guide
(Figure
External power
supply connection
10 Gigabit
stacking ports
57.
40) includes:
"Summit XGM2-2xn Option Card" on
150.
for more information.
Power socket
SH_029
(Figure 39) includes:
"Summit X450, X450a, and X450e Series
51