HWC_GSG_Chapter 1_Overview.fm
Summit WM-Series WLAN Switch Software Solution
Summit WM Switch's physical description
2.2 Summit WM Switch's physical description
20
2.1.5.4 DHCP for traffic bridged locally at Altitude AP
Summit WM Switch
Altitude AP
Wireless
Device
Figure 5
DHCP for traffic bridged locally at Altitude AP
The DHCP relay configuration is done via Summit WM Switch. For more
information, see
Section 8.4, "Creating and configuring a Bridge Traffic Locally At
WAP WM-AD", on page
This section provides a physical description of the Summit WM Switch.
2.2.1 Summit Switch WM2000 front panel
The Summit Switch WM2000is composed of the following three cards:
•
Media Flash 1000 (MF 1000)
•
Network Processor 4000 (NP 4000)
•
Supervisor 1100 (SC 1100)
DNS Server
DHCP Server
101.
Summit WM, Getting Started Guide
* A wireless device sends a
request for IP address to
Altitude AP
* The Altitude AP forwards
the request to the DHCP
server
* The DHCP server responds
by sending the IP address to
the Altitude AP
* The Altitude AP sends the
IP address to the wireless
device
Altitude AP
Wireless
Device
120385-00 Rev 01, March 2007