Summit X450-24X Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Redundant power input connector for optional connection to the EPS-160 External Power Module
●
(Model No. 10907).
See "EPS-160 External Power Module (with EPS-T)" on page 75
connecting redundant power supply cable is shipped with the EPS-160 unit.
AC power input socket
●
The power supply operates from 100 VAC to 240 VAC.
Figure 28: Summit X450-24t Switch Rear Panel
Management port
10 Gigabit
uplink option

Summit X450-24x Switch

The front panel of the Summit X450-24x switch
Twenty fixed SFP ports (ports 5-24) that provide 20 Gbps of high-density fiber connectivity
●
For information about SFPS, see the Extre me Ne two rks Plugga ble Inte rfa ce Mo dule s Ins ta lla tio n Guide .
Four combination ports (ports 1-4) using RJ-45 connectors and SFPs to provide 4 Gbps of copper or
●
fiber connectivity
For more information about combination ports, see
For information about SFPs, see the Extre me Ne two rks Plugga ble Inte rfa ce Mo dule s Ins ta lla tio n Guide .
LEDs to indicate port status and switch operating conditions.
●
For a description of the LEDs and their operation, see
Switch LEDs" on page
Stack number indicator showing the position of this switch in a stacked configuration.
●
Serial console port used to connect a terminal and perform local management.
●
Figure 29: Summit X450-24x Switch Front Panel
10/100/1000 Mbps ports
Band On = Link
Blinking = Activity
STACK NO.
Stack number
indicator Combination ports
Summit Family Switches Hardware Installation Guide
External power
supply connection
10 Gigabit
stacking ports
(Figure
58.
Mini-GBIC ports
Shared Ports
for more information. The
Power socket
S450_003A
29) includes:
"Combination Ports and Failover" on page
"Summit X450, X450a, and X450e Series
Console
port
S450_001D
16.
43