Step 6: Scan Rapid Deployment Bar Codes to Deploy CA50s
To deploy the CA50s onto the Demo Solution RF network and establish communication with the UCA server:
Insert the battery into the CA50. New units from the factory boot directly to the CA Menu.
NOTE If the device does not boot to the CA Menu, see
Launch the Rapid Deployment client from the CA Menu. For step-by-step instructions, see
Scan the 16 Rapid Deployment bar codes for the CA50 Demo Solution listed below. Scan these bar codes in
the order they are listed.
Self Contained Pre-Built Demo E - 11
Accessing the CA Menu on page 4-18