Resetting The Mc55; Performing A Warm Boot; Performing A Cold Boot; Waking The Mc55 - Motorola MC55 User Manual

2 - 12 MC55 User Guide
LED Indications (Continued)
Table 2-6
Fast Blinking Amber
Off
Single Blink Amber (when Power button pressed)
Blinking Amber (when Power button pressed)
NOTE For information about scanning/decoding, see

Resetting the MC55

There are two reset functions, warm boot and cold boot. A warm boot restarts the MC55 by closing all running
programs. A cold boot also restarts the MC55, and also resets the clock. Data saved in flash memory or a memory
card is not lost.
If the MC55 is not functioning properly, perform a warm boot first. If the MC55 still does not respond, perform a cold
boot.

Performing a Warm Boot

Hold down the red Power button for approximately five seconds. As soon as the MC55 starts to boot release the
Power button.

Performing a Cold Boot

To perform a cold boot:
•
On a numeric keypad, simultaneously press the red Power button and the
•
On an alphanumeric keypad, simultaneously press the red Power button and the

Waking the MC55

The wake-up conditions define what actions wake up the mobile computer after it has gone into suspend mode.
The mobile computer can go into suspend mode by either pressing the Power button or automatically by Control
Panel time-out settings. These settings are configurable and the factory default settings are shown in
subject to change/update.
Wake-up Default Settings
Table 2-7
Condition for Wake-up
AC power is applied.
Mobile computer is inserted into a cradle.
LED State Indication
Charging error.
Not charging.
Battery depleted.
Battery over-temperature condition.
Data Capture on page 2-31.
Power Button
No
No
and keys.
and keys.
Table 2-7 are
Automatic Time-out
Yes
Yes