Change Password
The reader.set_pwd()
parameters:
•
Login (level for password to be changed)
•
Pwd (existing password for the login level)
•
New_pwd (new password for the login level).
The login and existing password are required to change the password. For example, to change the initial
password for the guest login level to 19qht34 use the following command:
> reader.set_pwd(guest,readerguest,19qht34)
ok
To prevent unauthorized reader access, it is strongly recommended that the default guest login
NOTE
and admin password are changed.
command is used to change the password. This command requires the following
Reader Operation
3 - 3