Ip Dhcp Relay Information Circuit-Id; Ip Dhcp Relay Information Remote-Id - Zte ZXR10 Command Manual

ZXR10 Command Manual (Basic Configuration Volume II)
Syntax
Description
Defaults
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Example
Related
Commands
Purpose
Command Modes
88 Confidential and Proprietary Information of ZTE CORPORATION
uniform
interface
Interface mode
This example shows how to configure user configuration policy of
DHCP Relay Option 82.
ZXR10(config)#ip dhcp relay information user-configuration policy interface
show ip dhcp configure
ip dhcp relay information user-configuration policy interf
ace
ip dhcp relay information
circuit-id
Use this command to configure sub option of DHCP OPT82 cir-
cuit-id based on Layer 3 interface. Use no command to delete the
configuration.
Interface configuration
ip dhcp relay information circuit-id <circuit-id string>
no ip dhcp relay information circuit-id
<circuit-id string>
Null, that is, the sub option of DHCP OPT82 circuit-id is not con-
figured.
This example shows how to configure sub options of DHCP Relay
Option 82 circuit-id.
ZXR10(confi-if)#ip dhcp relay information circuit-id "zxr10:vlan100:gei_1/1"
show ip dhcp relay information interface
ip dhcp relay information
remote-id
Use this command to configure sub option of DHCP OPT82 re-
mote-id based on Layer 3 interface. Use no command to delete
the configuration.
Interface configuration
Select the string of option 82 configured in
uniform mode to insert to DHCP packet
Select the string of option 82 configured in
interface mode to insert to DHCP packet
The string of option 82 circuit-id configured
by the user