ZXR10 Command Manual (Basic Configuration Volume II)
Purpose
Command Modes
Syntax
Syntax
Description
Instruction
76
Confidential and Proprietary Information of ZTE CORPORATION
release dhcp ................................................................... 105
renew dhcp..................................................................... 106
ip address dhcp
Use this command to enable the dhcp client function of the inter-
face.
Interface configuration
ip address dhcp [client-id <interface>][hostname <hostnam
e>]
no ip address dhcp [client-id | hostname]
<interface>
hostname
This command is used for enabling the dhcp client module under
the interface. Both the client-id of dhcp client and the content of
hostname can be configured synchronously. If the client id is set
to an interface, then the information of the dhcp client packet is
the MAC address of this interface. Enable the dhcp client module
of this interface and delete the corresponding configuration with
the no command.
The platform version 4.8.22 supports this command.
It is only applied to 59 series switches.
The interface name, such as fei_1/1vlan1.
The hoatname of dhcp client, in length 1-128.