Default-Router; Dns-Server; Ip Dhcp Pool - Zte ZXR10 Command Manual

ZXR10 Command Manual (Basic Configuration Volume II)
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
118 Confidential and Proprietary Information of ZTE CORPORATION

default-router

Use this command to configure the default routes. Delete the con-
figuration with the no command.
DHCP pool configuration
default-router <ip_addr>[<ip_addr>][<ip_addr>]
no default-router <ip_addr>[<ip_addr>][<ip_addr>]
<ip_addr>
It is up to configure 8 default routes.
This example shows how to configure a default route 1.1.1.58.
ZXR10(config)#ip dhcp pool dhcppool1
ZXR10(config-dhcp-pool)#default-router 1.1.1.58

ip dhcp pool

show ip dhcp pool

dns-server

Use this command to configure the address of the DNS server.
Delete the configuration with no command.
DHCP pool configuration
dns-server <ip_addr>[<ip_addr>][<ip_addr>]
no dns-server <ip_addr>[<ip_addr>]
It is up to configure 8 DNS server addresses.
This example shows how to configure the DNS server address as
2.2.2.253.
ZXR10(config)#ip dhcp pool dhcppool1
ZXR10(config-dhcp-pool)#dns-server 2.2.2.253
show ip dhcp pool

ip dhcp pool

Use this command to enter DHCP pool configuration mode from
global configuration mode. Delete corresponding IP DHCP pool.
Global configuration
ip dhcp pool <dhcp_pool-name>
no ip dhcp pool <dhcp_pool-name>
IP address