Ip Dhcp Client Broadcast-Flag; Ip Dhcp Client Class-Id - Zte ZXR10 Command Manual

Example
Related Command
Purpose
Command Modes
Syntax
Instruction
Example
Purpose
Command Modes
Syntax
Syntax
Description
Instruction
Example
The layer-3 interface type on switches that this command supports
is : vlan, supervlan.
This example shows how to enable the dhcp client module on the
interface.
ZXR10(config-if)#ip address dhcp client-id vlan1 hostname zxr10@zte.com
ZXR10(config-if)#
ip address

ip dhcp client broadcast-flag

Use this command to set the dhcp client broadcast-flag.
Interface configuration

ip dhcp client broadcast-flag

no ip dhcp client broadcast-flag
This command is used for setting the dhcp client broadcast-flag.
After setting this command, the packet sent by dhcp client includes
broadcast-flag. Cancel the setting with the no command.
The platform version 4.8.22 supports this command.
It is only applied to 59 series switches.
This example shows how to enable the dhcp client module on the
interface.
ZXR10(config-if)#ip dhcp client broadcast-flag
ZXR10(config-if)#

ip dhcp client class-id

Use this command to set class id of dhcp client.
Interface configuration
ip dhcp client class-id {<string1>| hex <string2>}
no ip dhcp client class-id
<string1>
<string2>
This command is used for setting the class id of dhcp client exam-
ple. The information of this option can be input by hexadecimal
form or the string form.
The platform version 4.8.22 supports this command.
It is only applied to 59 series switches.
This example shows how to set class id of dhcp client.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 DHCP and DHCP SNOOPING Configuration
class id in string form, in length of 1~128.
class id in hexadecimal form, in length of
1~128.
77