ZTE MF65 - Mobile Router Quick Start Guide

Getting to Know Your Device

Appearance

The following figure is only for your reference. The actual product may be different.

1. LED Indicators
2. Power Button
3. WPS Button
4. Micro USB Port
5. (U)SIM Card Slot
6. microSD Card Slot

NOTE: microSD logo is a trademark of SD-3C LLC.

Indicators

Indicator	Status	Description
Network	Red solid	Error status. Not registered to the mobile network, no (U)SIM card inserted or no network service available.
	Green solid	Registered to the mobile network.
	Green blinking	Connected to the mobile network and data is being transferred.
Wi-Fi	Blue solid	Wi-Fi is active.
	Blue blinking	WPS is active.
	LED light off	Wi-Fi is off or your device is in sleep mode.
Battery	Red solid/ blinking	The battery is low. Please charge the battery.
	Green blinking	The battery is being charged.
	Green solid	The battery level is middle or high.
	LED light off	Your device is in standby mode and not being charged, or the battery is not inserted.

Connection Scenario

Your device allows you to use your (U)SIM card to access the Internet and supports multi-clients for surfing on the Internet at the same time.
The following figure is only for your reference.

Installing Your Device

1. Slide the back cover and remove it
   
   
2. Insert the (U)SIM card.
   
   Your device does not support Micro/Nano or any other nonstandard SIM cards. To avoid device damage, please do not use them.
   
   
3. Insert the microSD card if necessary.
   
   
4. Insert the battery.
   
   
5. Close the back cover.
   

Connecting to Your Device

Via Wi-Fi

1. Power on your device directly. It will take 1~2 minutes to initialize.
2. Use your normal Wi-Fi application on the client to search for the available wireless networks.
   

NOTE: Please set the client to obtain an IP address automatically referring to the chapter "Configuring your PC", and then the client will get an IP address like "192.168.0.101".

3. Select the SSID of your device, and then click Connect.
   
   NOTE: Please check the label on your device to get the default SSID.
   
4. Input the password, and then click Connect.
   
   NOTE: You may need to input the password for Wi-Fi connection. Please check the label on your device to get the default.
   
5. Wait a moment, and then the client will connect to your device successfully.
   

Via USB Cable

1. Connect to the device.
   
2. Power on your device.
3. The OS detects and recognizes new hardware and finishes the installation automatically.
   NOTE: If the system does not launch installation automatically, you can run the installation program in path of My Computer > Mobinil hotspot.
   
4. Wait a moment, and then the client will connect to your device successfully.

Accessing the Internet

After the client connected to your device successfully, you can access the Internet in the Automatic or Manual mode. The default mode is Automatic.

NOTE: If you want to modify the detailed parameters of your device, please log in the webGUI configuration page by visiting http://192.168.0.1 or http://ufi.home. The default password is admin.

Configuring Your PC

Follow the following steps and figures for Windows XP to configure the Internet Protocol for your Wi-Fi connection.

1. Right-click My Network Places, and then select Properties.
   
2. Right-click Wireless Network Connection, and then select Properties.
   
3. Select Internet Protocol (TCP/IP), and then click Properties.
   
   
4. Select Obtain an IP address automatically and Obtain DNS server address automatically, and then click OK to finish the configuration.
   

Warning and Notice

To the Owner

• Some electronic devices are susceptible to electromagnetic interference sent by your device if inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of your device before using if necessary.
• Operating your device may interfere with medical devices like hearing aids and pacemakers. Please always keep them more than 20 centimeters away from such medical devices when they are turned on. Turn your device off if necessary. Consult a physician or the manufacturer of the medical device before using your device.
• Be aware of the usage limitation when using your device at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Turn off your device if required.
• The use of electronic transmitting devices is forbidden in aircrafts, at petrol stations and in hospitals. Please observe and obey all warning signs and switch off your device in these conditions.
• Do not touch the inner antenna area if not necessary. Otherwise it will affect your device's performance.
• Store your device out of the reach of little children. Your device may cause injury if used as a toy.
• Do not touch the metallic parts of your device so as to avoid a burn, when your device is working.

Using Your Device

• Please use original accessories or accessories that are authorized. Using any unauthorized accessories may affect your device's performance, and violate related national regulations about telecom terminals.
• Avoid using your device near or inside metallic structures or establishments that can emit electromagnetic waves. Otherwise it may influence signal reception.
• Your device is not waterproof. Please keep it dry and store in a shady and cool place.
• Do not use your device immediately after a sudden temperature change. In such case, it will produce dew inside and outside your device, so don't use it until it becomes dry.
• Handle your device carefully. Do not drop, bend or strike it. Otherwise your device will be damaged.
• No dismantling by non-professionals and only qualified technicians can undertake repair work.
• Operating temperature range of 0ºC ~ +35ºC and humidity range of 5% ~ 95% are recommended.

Using Battery

• Do not short-circuit the battery, as this can cause excessive heat and fire.
• Do not store battery in hot areas or dispose of it in a fire to avoid explosion.
• Do not disassemble or modify the battery.
• When not using the battery for a long period, remove it from your device and store it in a cool dry place.
• Never use any charger or battery damaged or worn out.
• Return the wear-out battery to the provider or put it in the appointed recycle place. Do not put it in familial rubbish.

If the battery is broken, keep away from it. If it taints your skin, wash your skin with abundant fresh water and ask doctor help if necessary.

Limited Warranty

• This warranty does not apply to defects or errors in the Product caused by:

1. Reasonable abrasion.
2. End User's failure to follow ZTE's installation, operation or maintenance instructions or procedures.
3. End User's mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the Product.
4. Modifications or repairs not made by ZTE or a ZTE-certified individual.
5. Power failures, surges, fire, flood, accidents, actions of third parties or other events outside ZTE's reasonable control.
6. Usage of third-party products, or usage in conjunction with third-party products provided that such defects are due to the combined usage.
7. Any other cause beyond the range of normal usage intended for the Product.

End User shall have no right to reject or return the Product, or receive a refund for the Product from ZTE under the above-mentioned situations.

• This warranty is End User's sole remedy and ZTE's sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law.

Limitation of Liability

ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost.

Troubleshooting

For more assistance, please:

• Send E-mail to mobile@zte.com.cn
• Visit www.ztedevice.com
• Call Service Hotline: +86–755–26779999

LEGAL INFORMATION

Copyright © 2013 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No. : 1.0 Edition Time: 09, 2013

NOTE:
Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged work in such space may cause excessive heat and raise ambient temperature, which may lead to automatic shutdown of the device for your safety. In the case of such event, cool the device in a well-ventilated place before turning on for normal use.
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26779999
URL: http://www.ztedevice.com
E-mail: mobile@zte.com.cn

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download ZTE MF65 - Mobile Router Quick Start Guide