Set Interface Recover; Set Interface Speed - Zte ZXR10 Command Manual

ZXR10 Command Manual (Basic Configuration Volume II)
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
48 Confidential and Proprietary Information of ZTE CORPORATION
negotiation auto

set interface recover

Use this command to cancel the link up/link down alarm and the
SNMP TRAP information of the shielding ethernet interface in batch
scale.
Global configuration
set interface recover<up-down-type><port-list>
<up-down-type>
<port-list>
This example shows how to cancel the link up alarm and the SNMP
TRAP information of the shielding interface fei_1/1, fei_1/2 and
fei_1/3.
ZXR10(config)#set interface recover up-alarm fei_1/1-3
recover

set interface speed

Use this command to set the speed of Ethernet ports in batch.
Global configuration
set interface speed <speed-value><port-list>
<speed-value>
<port-list>
100 Mbps for fast Ethernet electrical interfaces, and 1000 Mbps
for Gigabyte Ethernet electrical interfaces.
The speed of fast Ethernet optical interfaces, Gigabyte Ethernet
optical interfaces and 10 Gigabyte Ethernet interfaces cannot be
configured.
This example describes how to set the speed of ports fei_1/1,
fei_1/2 and fei_1/3 to 100 Mbps.
ZXR10(config)#set interface speed 100 fei_1/1-3
The value is down-alarm or up-alarm.
down-alarm: cancel shielding the link down
alarm and SNMP TRAP information
up-alarm: cancel shielding the link up alarm
and SNMP TRAP information.
Specifies the port list to configure in batch
scale.
Speed of the ports, 10 Mbps, 100 Mbps or
1000 Mbps
Port list of the batch configuration