Ip-Pool; Lease-Time - Zte ZXR10 Command Manual

Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
<dhcp_pool-name>
The platform version 4.8.02 and upgrade versions support this
command.
This example shows how to configure the DCHP pool name to
pool1.
ZXR10(config)#ip dhcp pool dhcppool1
show ip dhcp pool

ip-pool

Use this command to bind the designated IP POOL to DHCP POOL.
Delete the configuration with no command.
DHCP pool configuration
ip-pool <ip_pool_name>
no ip-pool
<ip_pool_name>
The platform version 4.8.02 and upgrade versions support this
command. It is the required configuration of DHCP function.
This example shows how to bind an IP POOL named pool1 to the
DHCP POOL.
ZXR10(config)#ip dhcp pool dhcppool1
ZXR10(config-dhcp-pool)#ip-pool pool1
show ip dhcp pool

lease-time

Use this command to configure the lease time of an IP address.
Delete the configuration and restore the default value with the no
command.
DHCP pool configuration
lease-time [[infinite]|[<days><hours><minutes>]]
no lease-time
<days>
<hours>
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 DHCP Pool Configuration
DHCP POOL, 1~16 characters.
IP POOL name, within 1~16 characters.
Ranging from 0 to 365
Ranging from 0 to 23
119