Ip Dhcp Relay Information Policy; Ip Dhcp Relay Information Uniform Circuit-Id - Zte ZXR10 Command Manual

ZXR10 Command Manual (Basic Configuration Volume II)
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
86 Confidential and Proprietary Information of ZTE CORPORATION
show ip dhcp relay
ip dhcp relay information
policy
Use this command to set the processing policy of the DHCP process
when the 82 option has already been inserted in the relay forward
packet, and an 82 option is to be inserted again according to the
local configuration. Cancel the configured policy and restore the
default with the no command.
Global configuration
ip dhcp relay information policy {keep |replace}
no ip dhcp relay information policy
keep
replace
The original 82 option remains, that is, transparent transmission
is performed.
This example describes how to set the policy of the 82 option in-
serted by the DHCP process in relay forwarding to replace.
ZXR10(config)#ip dhcp relay information policy replace
ip dhcp relay information option
show ip dhcp relay
ip dhcp relay information
uniform circuit-id
Use this command to configure sub option of DHCP OPT82 cir-
cuit-id based on uniform mode. Use the no command to delete
the configuration.
Global configuration
ip dhcp relay information uniform circuit-id <circuit-id stri
ng>
no ip dhcp relay information uniform circuit-id
<circuit-id string>
Keeps the original 82 option, and performs
transparent transmission
Replaces the original 82 option
The string of option 82 circuit-id configured
by the user