Ip Dhcp Relay Snooping Trust; Ip Dhcp Relay Snooping Trust Enable; Ip Dhcp Server Max-User - Zte ZXR10 Command Manual

Purpose
Command Modes
Syntax
Example
Related
Commands
Purpose
Command Modes
Syntax
Defaults
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description

ip dhcp relay snooping trust

Use this command to configure DHCP Relay trust interface.
Global configuration

ip dhcp relay snooping trust

no ip dhcp relay snooping trust
This example shows how to configure DHCP Relay trust interface
on fei_1/1.
ZXR10(config)#interface fei_1/1
ZXR10(config-if)#ip dhcp relay snooping trust
ip dhcp enable

ip dhcp relay snooping trust enable

show ip dhcp configure
ip dhcp relay snooping trust
enable
Use this command to enable DHCP Relay Snooping Trust globally.
Global configuration

ip dhcp relay snooping trust enable

no ip dhcp relay snooping trust enable
By default, DHCP Relay Snooping Trust is disable.
This example shows how to enable DHCP Relay Snooping Trust
globally.
ZXR10(config)#ip dhcp relay snooping trust enable
show ip dhcp configure

ip dhcp server max-user

Use this command to set the maximum users that DHCP Server
supports.
Global configuration
ip dhcp server max-user <max-user>
no ip dhcp server max-user
<max-user>
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 DHCP and DHCP SNOOPING Configuration
The maximum users that DHCP Server veneer
supports, in the range of 1~32768.
93