Ip Dhcp Logging On; Ip Dhcp Ramble; Ip Dhcp Relay Agent - Zte ZXR10 Command Manual

ZXR10 Command Manual (Basic Configuration Volume II)
Related
Commands
Purpose
Command Modes
Syntax
Defaults
Instructions
Example
Purpose
Command Modes
Syntax
Defaults
Instructions
Example
Purpose
Command Modes
Syntax
82 Confidential and Proprietary Information of ZTE CORPORATION
show ip dhcp configure

ip dhcp logging on

Use this command to start DHCP dialogue print switch. Use the
no command to stop DHCP printing function.
Global configuration

ip dhcp logging on

no ip dhcp logging on
DHCP dialogue printing function is disabled.
Enable DHCP dialogue printing function, and then record DHCP
user online dialogue.
This example describes how to start the built-in DHCP printing
function.
ZXR10(config)#ip dhcp logging on

ip dhcp ramble

Use this command to configure roam function of DHCP
SERVER/RELAY. Use the no command to disable dhcp roam
function.
Global configuration

ip dhcp ramble

no ip dhcp ramble
Disable DHCP roam function
After the DHCP roam function is enabled, DHCP user can switch
the access interface as on-line status.
This example describes how to configure DHCP user roam function
in global mode.
ZXR10(config)#ip dhcp ramble

ip dhcp relay agent

Use this command to configure the DHCP agent IP address of the
interface. Delete the DHCP agent IP address with the no com-
mand.
Interface configuration
ip dhcp relay agent <ip-address>
no ip dhcp relay agent