Technical Specifications - HID Fargo HDP8500 User Manual

© 2012 HID Global Corporation. All rights reserved.

Technical Specifications

Print Method
Print Resolution
Print Colors
Print Ribbon Options
HDP Film Options
Overlaminate Options
Print Speed in Batch
Mode-Normal mode
HDP8500 Industrial Card Printer/Encoder User Guide
HDP Dye-Sublimation/ Resin Thermal Transfer
300 dpi (11.8 dots per mm)
Up to 16.7 million and 256 shades per pixel
HDP8500 (prints or images):
Full-color, YMC*, 750 prints
Full-color with resin black, YMCK*, 500 prints
Full-color with two resin black panels, YMCKK*, 500 prints
Full-Color – Half Panel YMCK*, 1000 prints
Full-color with resin black and heat seal panel for difficult-
to-print surfaces, YMCKH*, 500 prints
Full-color with resin black and inhibit panel for signature or
other non-printing areas, YMCKI*, 500 prints
Full-color with fluorescing and resin black, YMCFK*, 500
prints
Resin black, K, 3000 prints
* Indicates the Ribbon type and the number of Ribbon panels
printed where Y=Yellow, M=Magenta, C=Cyan, K=Resin
Black, H=Heat Seal , I= Inhibit, and F=Fluorescing
System Capability - HDP Film Options:
Clear (1,500 prints)
Standard Holographic (500 prints)
Custom Holographic, special order (500 prints)
Overlaminate options:
Thermal Transfer Overlaminate, .25 mil thick, 500 prints
PolyGuard® Overlaminate, 1.0 mil and .6 mil thick, 250
prints (PolyGuard available in a CR-80 patch size)
All overlaminates available in clear, standard holographic
design or custom holographic design
Batch Mode:
Performance Normal
L001617 rev 1.1
15