HID Fargo HDP8500 User Manual page 181

© 2012 HID Global Corporation. All rights reserved.
Sensor Error
Remove Laminator
Film
Print Film Out
Print Film is not
Installed
Print Film Sensor
Error
Wrong Print Film
Installed
Print Film Error
Invalid Film
Hopper Full
HDP8500 Industrial Card Printer/Encoder User Guide
Film.
To continue, remove the
laminator's film.
The Print Film installed in
the printer is empty.
No Print Film is installed in
the Printer.
The Printer cannot find
the next panel on the Print
Film.
An incorrect Print Film has
been installed, or a driver
setting is incorrect.
The Print Film caused a
general error.
An unauthorized film is
installed in the Printer.
Output Card Hopper is full
to capacity
properly and press Resume.
To cancel, press the Cancel Print
button or the Cancel button located
on the Printer.
Open the Laminator's Front Cover.
Remove the film and close the
Laminator's Front Cover.
Install new Film and press the
Resume button to continue printing.
To cancel the print, press the
Cancel Print button or the Cancel
button located on the Printer.
Install the Film and press Resume.
To cancel the print, press the
Cancel Print button or the Cancel
button located on the Printer.
Check that the Print Film is installed
properly and press Resume.
To cancel the print, press the
Cancel Print button or the Cancel
button located on the Printer.
Ensure that the appropriate Print
Film is installed and press the
Resume button located on the
Printer to continue printing.
To cancel, press the Cancel Print
button or the Cancel button located
on the Printer.
Ensure that the appropriate Print
Film is installed and press the
Resume button located on the
Printer to continue printing. To
cancel, press the Cancel Print
button or the Cancel button.
Get the correct Film from your
dealer.
Empty the Hopper.
L001617 rev 1.1
181