HID Fargo HDP8500 User Manual page 58

© 2012 HID Global Corporation. All rights reserved.
UltraCard stock
Custom
HDP8500 Industrial Card Printer/Encoder User Guide
In addition, cards must have a completely smooth, level surface
in order for the Printer to achieve consistent color Coverage.
Some types of Proximity cards, for example, have an uneven
surface which will inhibit consistent color transfer.
Likewise, some smart card chips are raised slightly above the
cards surface, which also results in poor color transfer.
Due to the importance of using high-quality blank cards, a factory-
approved card stock called UltraCard™ is available and
recommended for best results.
UltraCard stock has a glossy PVC laminate on top and bottom
and is optically inspected to provide the cleanest, most scratch
and debris-reduced cards possible.
Two types of these cards are available: UltraCard and UltraCard
Premium III.
UltraCard stock has a PVC core and offers medium card
durability.
Recommended: UltraCard Premium III stock has a 40%
polyester core and offers high durability.
Both types of UltraCards produce printed images with a glossy,
photo-quality finish.
If using a card stock other than listed, use the Custom 1options to
save custom Dwell Time and dwell temperature controls on the
Image Transfer tab.
a. Click on the Custom options and enter a name for the card
stock.
b. Click on the Image Transfer tab to adjust the Dwell Time and
temperature sliders to the appropriate settings. See the Display
A below. page. (Note: These settings will be saved for the
custom card type when the Printer Driver setup window is
closed.)
c. Custom Card stock: To determine the proper settings for
custom card stock, apply the Tape adhesion Test.
the Tape Adhesion Test.
L001617 rev 1.1
Conducting
58