Using The Print Tof (Top Of Form) Option - HID Fargo HDP8500 User Manual

© 2012 HID Global Corporation. All rights reserved.

Using the Print TOF (Top of Form) Option

Follow these instructions:
Step Procedure
1 Print the alignment card self-test (The front edge should look like figure below).
2 Adjust the Print TOF until the green border is eliminated and the entire
Transfer Alignment Block is shown in the center of the card. Note – due to
variation in roller alignment, the green border may appear at a slight angle on
the top of the card.
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
129