Table of Contents
Advertisement
© 2012 HID Global Corporation. All rights reserved.
Using the Image Darkness Option
Use this option to set the overall darkness of the printed image by increasing or decreasing the
amount of heat used by the Printhead when printing.
Step
Procedure
1
Lighten the printed image by clicking the down arrow
value and decrease the amount of Printhead heat.
OR
Darken the image by clicking the up arrow
increase the amount of Printhead heat.
IMPORTANT: If the value is set too high, the Ribbon may jam or even
break.
HDP8500 Industrial Card Printer/Encoder User Guide
to enter a negative
to enter a positive value and
L001617 rev 1.1
128
Advertisement
Table of Contents
Troubleshooting
