Technical Specifications - HID HDP5000 User Manual

HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
仅适用于海拔2000m 以下地区安全使用
Use only at altitudes not more than 2000m above sea level.
仅适用于非热带气候条件下安全使用
Use only in non-tropical conditions.
环境保护(中国-RoHS)
环保使用期是基于本产品用于办公环境。
Environmental Protection Use Period is based on the product being used in an office
environment.
1.3

Technical Specifications

Term
Print Method
Print resolution
Print Modes
Colors
Accepted Card Types
(Compositions)
Card Cleaning
Input Hopper Capacity
Output Hopper Card
Capacity
Card Sizes (Accepted
Standard sizes)
July 2013
Description
Dye Sublimation / Resin Thermal Transfer
300 dpi (11.8 dots/mm); continuous tone
There are two print modes (Performance and Normal )
• Normal print mode (default)
• Performance print mode is faster with lower image quality and is
most suitable for minimal color with mostly resin text.
Up to 16.7 million colors / 256 shades per pixel
ABS, Laminated PVC, PET, PETG, smart cards, mag stripe cards,
optical memory cards, 100% polycarbonate able to accept HDP
retransfer.
Replaceable cleaning roller (included with each print Ribbon)
100 cards , 30 mil cards-standard hopper
200 cards, 30 -40 mil cards- dual-input hopper optional
200 card Output Hopper capacity, 30 mil – 40 mil
Reject hopper 5 cards minimum, 30 mil (with flipper module)
These Card Printers accept standard CR80 sized cards (3.370L x
2.125W / 85.6mmL x 54mmW) with a thickness of 30 mil to 50 mil
(.030/.762mm).
The Laminator will accept card thickness of 30 mil to 50 mil.
Dual Hopper limited to 30 mil to 40 mil.
© 2012, 2013 HID Global Corporation. All rights reserved.
Page 9 of 101