HID Fargo HDP8500 User Manual page 82

© 2012 HID Global Corporation. All rights reserved.
Step Procedure
3 Control the amount of heat the Printer uses when printing with the resin black
Panel by adjusting the Resin Heat slide.
Move the slide to the left to cause less heat to be used in the printing
process, causing resin images to be lighter or less saturated.
OR
Move the slide to the right to cause more heat to be used, causing resin
images to be darker or more saturated.
(Note: This control can be helpful for fine-tuning the sharpness of resin text
and bar codes.)
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
82