Ribbon Factory Take-Up; Ribbon Factory Supply; Film Factory Take-Up; Film Factory Supply - HID Fargo HDP8500 User Manual

© 2012 HID Global Corporation. All rights reserved.

Ribbon Factory Take-up

This setting corrects for motor speed variation of the ribbon take-up motor. It has a range
of -20 to +20. The larger the value the faster the motor will go. This is a factory setting, the user
should never adjust this.

Ribbon Factory Supply

This setting corrects for motor speed variation of the ribbon supply motor. It has a range
of -20 to +20. The larger the value the faster the motor will go. This is a factory setting, the user
should never adjust this.

Film Factory Take-up

This setting corrects for motor speed variation of the film take-up motor. It has a range of
-20 to +20. The larger the value the faster the motor will go. This is a factory setting, the user
should never adjust this.

Film Factory Supply

This setting corrects for motor speed variation of the film takeup motor. It has a range of
-20 to +20. The larger the value the faster the motor will go. This is a factory setting, the user
should never adjust this.

Reviewing the Value outside the Range error message

If typing a value outside the range, an error message will display specific to the setting when
leaving the spin control to click any other spin control, button or tab.
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
141