Using The Dual Sided - Print Both Sides Option; Using The Print Both Sides - Split 1 Set Of Ribbon Panels Option - HID Fargo HDP8500 User Manual

© 2012 HID Global Corporation. All rights reserved.

Using the Dual Sided - Print Both Sides option

Use this option to automatically print on both the front and backside of a card.
Step Procedure
1 Select this option in conjunction with any application program that supports a
multiple-page document, duplex printing. (Note: The program must be able
to send down two or more separate pages to be printed within the same
document.)
2
Page 1 will be transferred to the front side of the card.
Page 2 will be transferred to the backside of the card.
The Printer Driver will always place all odd numbered pages on the front
side of the card and all even numbered pages on the back side with this
option selected.
Using the Print Both Sides - Split 1 Set of Ribbon Panels
option
Use this option to provide the most economical means of printing a dual-sided card since a
single set of Ribbon Panels will be split to print both the front and backside of a card.
This option becomes active when Print Both Sides is checked.
The Default is active and unchecked except for YMCKK, which is checked.
Step Procedure
1 Select this option to automatically print full-color on the front of a card and
resin black on the back of a card (using YMCKK Print Ribbons).
If using a YMCKK Ribbon, the front of the card is printed with the YMCK
Panels and the back is printed with the second K Panel.
(Note #1: This option is automatically enabled when a YMCKK Ribbon type
is selected.)
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
71