HID Fargo HDP8500 User Manual page 175

© 2012 HID Global Corporation. All rights reserved.
Card Jam
(Laminator)
Card Eject Error
Flipper Jam
HDP8500 Industrial Card Printer/Encoder User Guide
A Card has become
jammed in the Printer's
Lamination Module.
The Printer is unable to
eject a card.
The Flipper Table has
jammed while either
aligning itself or flipping a
c. Close the Printer‟s Front Cover.
d. Press the Resume button
located on the Printer's LCD
display to continue printing.
e. To cancel the print, press the
Cancel Print button from the
Driver's display dialog or the
Cancel button on the Printer's
LCD display.
a. Open the Printer's Module‟s
Front Cover and remove the
Overlaminates.
b. Clear any cards in the
Lamination Module by using the
Forward Arrow and/or Back
Arrow buttons located on the
Printer‟s LCD display. The
Printer‟s Front Cover must be
open for use of the Forward and
Back buttons.
c. Re-insert the Overlaminate(s)
and close the Lam Module‟s
Front Cover.
d. Press the Resume button
located on the Printer's LCD
display to continue printing.
e. To cancel the print, press the
Cancel Print button from the
Driver's display dialog or the
Cancel button on the Printer's
LCD display.
Please check Printer for a card jam
or other obstruction and press the
Resume button located on the
Printer's LCD display to continue
printing.
To cancel the print, press the
Cancel Print button from the
Driver's display dialog or the Cancel
button located on the Printer's LCD
display.
a. Open the Printer's Flipper
Module Cover.
L001617 rev 1.1
175