Technical Specifications - HID FARGO DTC1250E User Manual

PLT-01668, Version: 1.2
1.3

Technical Specifications

Term
Print Method
Print resolution
Colors
Print Ribbon Options
Print Speed
Card Size and Types
Supported
Accepted Standard Card
Sizes
Accepted Card Thickness
December 2016
Function
Dye Sublimation / Resin Thermal Transfer
300 dpi (11.8 dots/mm); continuous tone
Up to 16.7 million colors / 256 shades per pixel
Full-color with resin black and overlay panel, YMCKO*
(500 prints)
Full-color half-panel with resin black and overlay panel, YMCKO*
(850 prints)
Full-color with two resin black panels and overlay panel, YMCKOK* (500
prints)
Full-color with fluorescing, resin black panel and overlay panel, YMCFKO* (500
prints)
Full-color with fluorescing, two resin black panels and overlay panel,
YMCFKOK* (400 prints)
Full-color half-panel with two resin black and overlay panel, YMCKOK* (500
prints)
Full-color half-panel with two resin black and two overlay panels, YMCKOK*
(500 prints)
Resin black and overlay panel, KO* (1250 prints)
Dye-sublimation black and overlay print, BO* (1250 prints)
Resin black (standard and premium) (3000 prints)
Resin green, blue, red, white (1000 prints)
Resin silver (2000 prints)
Resin gold (1000 prints)
Rewrite technology – No ribbon is required
* Indicates the ribbon type and the number of ribbon panels printed where
Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, O=Overlay, F=Fluorescing Resin
6 seconds per card (K*)
8 seconds per card (KO*)
16 seconds per card (YMCKO*)
24 seconds per card (YMCKOK*)
Print speed indicates an approximate batch print speed and is measured from
the time a card feeds into the printer to the time it ejects from the printer.
Print speeds do not include encoding time or the time needed for the PC to
process the image.
Process time is dependent on the size of the file, the CPU, amount of RAM and
the amount of available resources at the time of the print.
* Indicates the ribbon type and the number of ribbon panels printed where
Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, O=Overlay, F=Fluorescing Resin
CR-80 (3.375"L x 2.125"W / 85.6mmL x 54mmW)
CR-79 (3.313"L x 2.063"W / 84.1mmL x 52.4mmW
CR-80 edge-to-edge (3.36"L x 2.11"W/85.3mmL x 53.7mmW)
CR-79 (3.3"L x 2.04"W/83.8mmL x 51.8mmW)
.009" - .040" / 9 mil – 40 mil/.229mm – 1.016mm
Specifications
Page 1-7