© 2012 HID Global Corporation. All rights reserved.
Loading the Blank Cards
Step
Procedure
1
Unlock and open the Card Input Cartridge.
Leave the cartridge in the Printer, There is no need to completely remove the
cartridge to load cards.
2
Load the cards into the cartridge.
Important: The front of the card must face DOWN. The back of the card
or the magnetic stripe on the card must face UP. The Smart Chip is
loaded on the bottom.
3
Place the Card Weight on top of each stack of cards.
HDP8500 Industrial Card Printer/Encoder User Guide
L001617 rev 1.1
51