Removal Of Swing Motor - Daikin R-410A Service Manual

ESIEN05-04

1.11.5 Removal of Swing Motor

Warning Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure:
Step
1 Remove the decoration
cover in the corner
located right below the
refrigerant piping.
2 Remove the 2 swing
motor mounting screws.
3 Disconnect the swing
motor connector.
Part 5 – Disassembly and Maintenance
Procedure
Decoration cover in the corner
Swing motor
Disassembly and Maintenance
Points
The connector section is
protected with the use of
aluminum tape. Remove the
aluminum tape.
5–29
1
3
5 5