ESIEN05-04
1.5
Fault-diagnosis by Wired remote control
Explanation
If operation stops due to malfunction, the remote control's operation LED blinks, and malfunction code
is displayed. (Even if stop operation is carried out, malfunction contents are displayed when inspection
mode is entered.) The malfunction code enables you to tell what kind of malfunction caused operation
to stop. See page 3-26 for malfunction code and malfunction contents.
Part 3 – Troubleshooting
Inspection / test button
Inspection display
Troubleshooting
Operation lamp
Indoor unit No. in which
a malfunction occurs
Malfunction code
1
3
3
4
5
3–21