How To Change The Field Settings With The Wired Remote Control - Daikin R-410A Service Manual

Field Settings
3.2

How to Change the Field Settings with the Wired remote control

1
Installation
conditions
Wired remote
control
3
4
5
Components
4–18
The field settings have to be changed with the remote control according to the installation conditions.
The illustration below shows the wired remote control.
4
12
14
17
26
27
28
The table below contains the components of the wired remote control.
No. Component
1 ON/OFF button
2 Operation lamp
3 Operation mode icon
4 Ventilation mode icon
5 Ventilation icon
6 Air cleaning icon
7 Leave home icon
8 External control icon
9 Change-over under centralised control icon 28
10 Day of the week indicator
11 Clock display
12 Maximum set temperature
13 Minimum set temperature
14 Schedule timer icon
15 Action icons
16 Off icon
17 Inspection required
18 Set temperature display
19 Setting
3 6 23 7 8
16 13 15 18 19 20
29
30 31 32
No. Component
20 Air flow direction icon
21 Not available
22 Fan speed icon
23 Defrost/hotstart mode icon
24 Air filter cleaning time icon
25 Element cleaning time icon
26 Ventilation mode button
27 Ventilation amount button
Inspection/test operation button
29 Programming button
30 Schedule timer button
31 Time adjust button
32 Temperature adjust buttons
33 Operation change/ button
34 Setpoint/limit button
35 Fan speed button
36 Air flow direction adjust button
37 Air filter cleaning time icon reset
9 2 1
10
11
22
25
21 5 24
33
35
36
37
34
Part 4 – Commissioning and Test Run
ESIEN05-04