Daikin R-410A Service Manual page 340

Disassembly and Maintenance
1.14.4 Removal of Fan Motor
1
Warning
Procedure:
Step
1 Removing fan motor
a. Disconnect connector.
b. Remove lead wire
retaining plate.
3
5 5
2 Remove screws for
mounting fan motor.
FUQ71BUV1B:
Three screws
FUQ100/125BUV1B:
Four screws
5–100
Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure
ESIEN05-04
Points
Caution:
Fan motor can be removed
without removing the lead wire
retaining plate.
However, when washing the heat
exchanger, this plate should be
removed and protect the lead
wires.
Part 5 – Disassembly and Maintenance