Daikin R-410A Service Manual page 364

Disassembly and Maintenance
1.16.2 Removal of Slide Panel, Operation Display Cover, and Front Grille
1
Warning
Procedure:
Step
1 Remove the left and right
side panels. (1 white
screw each on left and
right)
3
2 Remove the operation
display cover installation
screw and remove the
cover by sliding to the
right.
5 5
3 Remove the front grille
installation screws (3
M4X l12 screws with
spacers)
4 Disconnect the upper
hook of the front grille
and remove.
5–124
Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure
ESIEN05-04
Points
The wiring diagram is applied to
the right side panel, and
troubleshooting list is applied to
the left side panel.
Part 5 – Disassembly and Maintenance