Daikin R-410A Service Manual page 370

Disassembly and Maintenance
1.16.7 Removal of Drain Pan
1
Warning
Procedure:
Step
If removing the drain pan:
Carry out pump down,
disconnect the transmission
piping and wiring, and
remove the main unit.
Remove side panels,
3 operation display cover and
front cover according to
their removal procedures.
1 Remove the bottom
panel.
5 5
2 Remove the air discharge
section.
5–130
Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure
ESIEN05-04
Points
The bottom panel is fastened to
the unit installation plate by 3
screws.
Part 5 – Disassembly and Maintenance