Replacement Of Receiver Section Of Infrared Remote Control - Daikin R-410A Service Manual

Disassembly and Maintenance

1.12.14 Replacement of Receiver Section of infrared remote control

1
Warning
Procedure:
Step
1 Removing the receiver
section
1 Remove two screws of
the transmission parts
box to remove the box.
3
2 Cut the tie wrap fixing
5 5
transmission parts box
and harness and
disconnect the connector
X1A.
3 Disconnect the lead wire
of the transmission parts
box from the connector
X24A on the indoor unit
PC board.
5–76
Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure
(S2694)
Tie wrap
(S2696)
Part 5 – Disassembly and Maintenance
ESIEN05-04
Points
Transmission parts box
X24
(S2695)