ESIEN05-04
Step
2
Loosen the 2 hexagon
set screws of the
intermediate bearing.
3
Slide the intermediate
bearing to the right and
remove the fan rotor
ass'y.
Part 5 – Disassembly and Maintenance
Procedure
Disassembly and Maintenance
Points
5–87
1
3
5
5
Need help?
Do you have a question about the R-410A and is the answer not in the manual?
Questions and answers
The rear filter on the external unit R410A has broken down. Replacement is required.
To replace the rear filter on the Daikin R-410A external unit:
1. Remove the tabs on the filter frame.
2. Replace the old filter with a new one.
3. Dispose of the old filter as burnable (flammable) waste.
Note: If the filter is made of paper, do not wring it out when removing water.
This answer is automatically generated