Removal Of Decoration Panel - Daikin R-410A Service Manual

Disassembly and Maintenance

1.11.3 Removal of Decoration Panel

1
Warning
Procedure:
Step
1 Removing the decoration
covers in the corner of
decoration panel
1 To remove the
decoration covers in the
corner, pull the inside
3
(suction grille side)
down.
5 5
2 Remove the one screw
to dismount the terminal
block box cover, then
disconnect the
connector for swing
motor.
For the auto grille,
disconnect the auto
grille power supply
cable from the power
supply terminal block.
3 Loosen the 4 retaining
screws from the
decoration panel.
4 The decoration panel is
caught on the 4 hooks
of the main unit.
5–26
Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure
Decoration cover in the corner
Remove a string (provided to
prevent the decoration cover
from dropping) from the
decoration cover in the corner
from the pin to dismount the
decoration cover.
Mounting
fixture
Retaining screw
Terminal block box cover
Part 5 – Disassembly and Maintenance
ESIEN05-04
Points
Structure of
mounting fixture
Hook
Connector for
swing motor