Replacement Of Heat Exchanger Thermistor - Daikin R-410A Service Manual

Disassembly and Maintenance

1.12.11 Replacement of Heat Exchanger Thermistor

1
Warning
Procedure:
Step
1 Disconnect the
grounding terminal from
the header.
3
2 Pull apart the thermistor
ass'y and motor lead wire
from the clamps.
5 5
3 Pull out the thermistor
from the slit of heat
exchanger partition plate.
4 Remove two screws to
the top panel, then, pull
the partition plate of heat
exchanger downward.
5–64
Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure
Clamp
Slit
(S2670)
Fan motor lead wire Thermistor
ass'y
Clamps
(S2671)
Fan motor lead wire
Heat exchanger
partition plate
(S2672)
ESIEN05-04
Points
Part 5 – Disassembly and Maintenance