Daikin R-410A Service Manual page 345

ESIEN05-04
1.14.6 Removal of Drain Pump
Warning Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure:
Step
1 Drain pump is located at
piping side.
Cut clamp material of
hose, and disconnect
hose from pump.
2 Remove four screws to
dismount drain pump.
3 Dismount drain pump by
pulling it down.
Part 5 – Disassembly and Maintenance
Procedure
Disassembly and Maintenance
Points
Caution:
When reconnect drain hose with
the pump, secure hose at joint
using clamping material such as
Tielap. (Clamping material should
be normally included in the stock
items.)
5–105
1
3
5 5