Daikin R-410A Service Manual page 317

ESIEN05-04
Step
4 Removing the decoration
panel
Refer to "Removal of
Decoration Panel"
5 Pull out the lead wire of
receiver section from
wiring groove.
6 Push three claws on the
rear side of panel to
remove the corner cover
(receiver section).
2 Installing the receiver
section
1 Pass through the lead
wire of the receiver
section, and insert the
corner cover.
2 Put the wire in the wiring
groove on the hooking
piece securely.
Part 5 – Disassembly and Maintenance
Procedure
Lead wire of receiver section
(S2697)
Hooking piece
Disassembly and Maintenance
Push three claws to remove
the corner cover.
Decoration panel
(S2699)
(S2700)
(S2701)
Points
1
3
(S2698)
5 5
5–77