Disassembly and Maintenance
1.14.3 Removal of Fan
1
Warning
Procedure:
Step
1
Remove two mounting
screws to dismount
switch box cover.
3
2
Remove suction air
temperature thermistor
attached to bell mouth.
5 5
3
Bell mouth is mounted
with tree screws.
Loosen a screw located
at diagonal position to
the pipings and remove
other two screws.
5–98
Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure
ESIEN05-04
Points
Edge of rib
Stick filament
Edge of
tape
clamp
Part 5 – Disassembly and Maintenance
(S1271)